New pages
Jump to navigation
Jump to search
- 23:55, 4 May 2024 Ninebot ES3 Plus (hist | edit) [25 bytes] Joeybab3 (talk | contribs) (Redirected page to Ninebot ES3) Tag: New redirect
- 23:55, 4 May 2024 Ninebot G30 (hist | edit) [26 bytes] Joeybab3 (talk | contribs) (Redirected page to Ninebot G30P) Tag: New redirect
- 19:48, 4 May 2024 Ninebot Max G2 DRV 1.8.11 (hist | edit) [36 bytes] Joeybab3 (talk | contribs) (Redirected page to Ninebot Max DRV 1.8.11) Tag: New redirect
- 17:46, 27 April 2024 Ninebot Max G2 DRV 1.7.3 (hist | edit) [583 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for DRV 1.7.0 from the Segway-Ninebot app. {{ Ninebot Max G2 DRV Firmware Header }} '''DRV 1.7.3''' was the twelfth known update for the Ninebot Max G2. ==Official Changelog== 1. Improve the riding stability of vehicles when riding downhill 2. Improve the security and stability of firmware ==User Notes== ==Files== There are no files available for this version. Category: Scooters[...")
- 04:52, 24 April 2024 Ninebot Max DRV 1.8.11 (hist | edit) [864 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for DRV 1.8.11 from the Segway-Ninebot app. {{ Ninebot Max DRV Firmware Header }} '''DRV 1.8.11''' was the eleventh DRV update for the Ninebot Max G30. ==Official Changelog== 1. Improve the security and compatibility of firmware, and adjust firmware performance according to regulations in various European countries ==User Notes== This update will likely lower speed or acceleration once agai...")
- 04:15, 24 April 2024 ScooterHacking ReFlasher (hist | edit) [975 bytes] Joeybab3 (talk | contribs) (Created page with "ScooterHacking ReFlasher is a Windows app made by the team at [https://www.scooterhacking.org/ ScooterHacking]. The app allows you to downgrade locked versions of DRV, BLE, or BMS. Category: Scooter AppCategory: NinebotCategory: XiaomiCategory: ScooterHacking.")
- 00:56, 18 April 2024 Ninebot Max G2 BMS 1.7.5.5 (hist | edit) [612 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for BLE 1.7.5.5 from the Segway-Ninebot app. {{ Ninebot Max G2 BMS Firmware Header }} '''BMS 1.7.5.4''' was the fifth BMS update for the Ninebot Max G2. ==Official Changelog== Improve firmware performance and stability ==User Notes== ==Files== No files are available for this version. Category: ScootersCategory: NinebotCategory: FirmwareCategory: Max G2 FirmwareCategory...")
- 00:56, 18 April 2024 Ninebot Max G2 DRV 1.10.15 (hist | edit) [612 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for DRV 1.10.15 from the Segway-Ninebot app. {{ Ninebot Max G2 DRV Firmware Header }} '''DRV 1.10.15''' was the 13th known DRV update for the Ninebot Max G2. This DRV version was a beta test. ==Official Changelog== Internal firmware update: 1. Update Master Control Firmware ==User Notes== This version was a beta test opened to G2 owners who applied. ==Files== No files are available fo...")
- 17:46, 5 April 2024 ScooterHacking Utility (hist | edit) [1,679 bytes] Joeybab3 (talk | contribs) (Created page with "'''ScooterHacking Utility''' (Also known as just Utility) is an Android app by the [https://scooterhacking.org ScooterHacking (SH) team]. It can be used to configure supported scooters and flash new/custom firmware to them. ==Download== ==Configuration== ==Firmware Support== ==SHFW== Category: Scooters")
- 16:19, 5 April 2024 Joeys Toolbox (hist | edit) [1,133 bytes] Joeybab3 (talk | contribs) (Created page with "Mostly just links to different data sources I want to keep track of. ==Education== ==Weather== *California Reservoir Capacity - [https://cdec.water.ca.gov/resapp/RescondMain https://cdec.water.ca.gov/resapp/RescondMain] Category: Tools")
- 23:27, 3 April 2024 Xiaomi Pump LED Meanings (hist | edit) [521 bytes] Joeybab3 (talk | contribs) (Created page with "The Xiaomi Pump/Portable Air Compressor has one LED to indicate the device's status. The indicated status can be different depending on whether the device is plugged in or not. ==When in Use== When the inflator is not connected to the charger, the LED colors are as follows: *White: More than 50% *Orange: 20% to 50% *Red: Less than 20%, charge as soon as possible ==When Charging== *Blinking White: Charging *White: Fully Charged Category: XiaomiCategory: Xiaom...")
- 23:22, 3 April 2024 Xiaomi Pump Portable Air Compressor (hist | edit) [299 bytes] Joeybab3 (talk | contribs) (Created page with "This page is an index for pages relating to the Xiaomi Mi Portable Compressor Pump. Mostly it just holds links to the page that defines what the LED's mean. ==Pages== *Xiaomi Pump Hardware Versions *Xiaomi Pump LED Meanings ==Files== *File:XiaomiPumpManual.pdf Category: Xiaomi")
- 17:13, 9 March 2024 JBuds Lux Firmware v0.1.2.9 (hist | edit) [458 bytes] Joeybab3 (talk | contribs) (Created page with "No update screenshot as this is the first version. {{ JLab JBuds Lux Firmware Header }} '''v_0.1.2.9''' was the firmware that shipped with the headphones ==Official Changelog== There is no changelog for this version as this is the first version to ship at launch. ==User Notes== None yet. Category: FirmwareCategory: JLab")
- 17:10, 9 March 2024 JBuds Lux Firmware v0.1.3.5 (hist | edit) [568 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for v0.1.3.5 from the JLab app. {{ JLab JBuds Lux Firmware Header }} '''v0.1.3.5''' was the first update for the JBuds Lux. ==Official Changelog== 1. ==User Notes== None yet. Category: Firmware")
- 17:09, 9 March 2024 JLab JBuds Lux Firmware (hist | edit) [300 bytes] Joeybab3 (talk | contribs) (Created page with "Firmware is essentially the Operating System for the headphones. ==Earbud Firmware== *JBuds Lux Firmware v0.1.2.9 *JBuds Lux Firmware v0.1.3.5 Category: JLabCategory: Firmware Index")
- 17:08, 9 March 2024 JLab Firmware Update Logs (hist | edit) [185 bytes] Joeybab3 (talk | contribs) (Created page with "This page holds firmware update logs for devices by the company JLab. ==Headphones== *JLab JBuds Lux Firmware ==Earbuds== *JLab Epic Lab Edition Firmware Category: JLab")
- 17:04, 9 March 2024 Epic Lab Edition Firmware 1.5.5 (hist | edit) [347 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for 1.5.5 from the JLab app. {{ JLab Epic Lab Edition Firmware Header }} '''1.5.5''' was the third update for the Epic Lab Edition. ==Official Changelog== 1. Improves touch control performance when reject calls ==User Notes== None yet. Category: Firmware")
- 04:45, 4 March 2024 Ninebot Max G2 BLE 1.11.1 (hist | edit) [645 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for BLE 1.11.1 from the Segway-Ninebot app. {{ Ninebot Max G2 BLE Firmware Header }} '''BLE 1.11.1''' was the 11th known BLE update for the Ninebot Max G2. This version was a beta version, the second of this test. ==Official Changelog== 内测固件,支持鼹鼠控功能 (Translated) Internal beta firmware, supports mole control function ==User Notes== This version was part of a beta t...")
- 05:04, 25 February 2024 Segway Power Station Cube Install Extension Battery (hist | edit) [1,555 bytes] Joeybab3 (talk | contribs) (Created page with "This page details how to install an extension battery on a Segway Power Station Cube/Cube 1000/Cube 2000. ==Process== Installation is relatively simple and all needed parts come with the extension battery. thumb|center|400px|The included parts are right on the top of the battery. Category: SegwayCategory: Segway Power Station Cube")
- 00:57, 24 February 2024 Segway Power Station Cube Error Code E16 (hist | edit) [492 bytes] Joeybab3 (talk | contribs) (Created page with " "Internal wires malfunction" {{Segway Power Station Cube Error Code SEO|16}} ==Cause== This error signals a potential problem with the power station's internal wiring. ==Fix== "Disconnect all the input/output devices and restart the power station." * Disconnect all input and output devices (solar, AC, USB, etc.). * Restart the power station. * If the error persists, contact technical support for further assistance. Category: Segway Power Station CubeCateg...")
- 00:57, 24 February 2024 Segway Power Station Cube Error Code E15 (hist | edit) [414 bytes] Joeybab3 (talk | contribs) (Created page with " "Battery malfunction" {{Segway Power Station Cube Error Code SEO|15}} ==Cause== This error indicates a potential issue with the Power Station Cube's battery. ==Fix== "Keep the power station stand still and restart it." * Keep the power station still and restart it. * If the error persists, contact technical support for further assistance. Category: Segway Power Station CubeCategory: Error Code")
- 00:56, 24 February 2024 Segway Power Station Cube Error Code E14 (hist | edit) [556 bytes] Joeybab3 (talk | contribs) (Created page with " "Inverter malfunction" {{Segway Power Station Cube Error Code SEO|14}} ==Cause== This error signals a problem with the power station's internal inverter, which converts DC power from the battery to AC power. ==Fix== "Disconnect the AC devices. Turn o� the AC output after 5 seconds and try again later." * Disconnect all AC devices. * Turn off the AC output, wait for 5 seconds and try turning it on again. * If the error persists, contact technical support for fur...")
- 00:56, 24 February 2024 Segway Power Station Cube Error Code E13 (hist | edit) [602 bytes] Joeybab3 (talk | contribs) (Created page with " "AC output short-circuit protection" {{Segway Power Station Cube Error Code SEO|13}} ==Cause== This error means there's a short circuit in your AC output connections or one of the devices connected to the AC outlets. ==Fix== Disconnect the loads. Turn off the AC output after 5 seconds and try again later. * Disconnect all the AC devices. * Check your wiring and the devices themselves for any signs of damage or short circuits. * Once the source of the short is fix...")
- 00:55, 24 February 2024 Segway Power Station Cube Error Code E12 (hist | edit) [589 bytes] Joeybab3 (talk | contribs) (Created page with ""AC output overload protection" {{Segway Power Station Cube Error Code SEO|12}} ==Cause== This error indicates the devices connected to the AC output are drawing more power than the Power Station Cube can safely provide. ==Fix== Disconnect the loads. Turn o� the AC output after 5 seconds and try again later. * Disconnect the loads (AC devices). * Turn off the AC output, wait for 5 seconds, and try again later. * Ensure the combined power draw of your AC devices...")
- 00:49, 24 February 2024 Segway Power Station Cube Error Code E11 (hist | edit) [481 bytes] Joeybab3 (talk | contribs) (Created page with " "USB output overload or short-circuit" {{Segway Power Station Cube Error Code SEO|11}} ==Cause== This error is likely caused by the USB ports drawing more than 3A on the USB-A ports or more than 5A on the USB-C ports. ==Fix== Disconnect the USB devices Make sure the devices connected to the USB ports are not drawing more than the rated amperage and that there are no issues with the cables connecting them. Category: Segway Power Station CubeCategory: Error...")
- 00:45, 24 February 2024 Segway Power Station Cube Error Code E10 (hist | edit) [462 bytes] Joeybab3 (talk | contribs) (Created page with " "Car output overload or short-circuit" {{Segway Power Station Cube Error Code SEO|10}} ==Cause== This error is likely caused by the 12v dc car-style output port drawing more than 10A. ==Fix== Disconnect the loads. Turn off the DC output after 5 seconds and try again later Make sure the device connected to the car port is not drawing more than 10A and there are no frayed wires or shorts. Category: Segway Power Station CubeCategory: Error Code")
- 00:42, 24 February 2024 Segway Power Station Cube Error Code E09 (hist | edit) [414 bytes] Joeybab3 (talk | contribs) (Created page with " "AC Input error" {{Segway Power Station Cube Error Code SEO|9}} ==Cause== This error is likely caused by an abnormal reading or grid-phase issue. ==Fix== AC Input abnormality caused by unstable power grid, please disconnect the AC charging cable. Try a different outlet or charging location to see if there is a supply issue or interference. Category: Segway Power Station CubeCategory: Error Code")
- 00:40, 24 February 2024 Segway Power Station Cube Error Code E08 (hist | edit) [534 bytes] Joeybab3 (talk | contribs) (Created page with " "Solar charging abnormality" {{Segway Power Station Cube Error Code SEO|8}} ==Cause== This error is likely caused by an abnormal reading when charging using the solar panel. ==Fix== 1. Check the solar panel type (80V/20A). If matched, the hardware circuit of the solar panel might have been damaged, please contact the after-sales service for support. 2. If not, please disconnect the solar panel. Make sure the unit has enough airflow during operation and nothing i...")
- 00:38, 24 February 2024 Segway Power Station Cube Error Code E07 (hist | edit) [538 bytes] Joeybab3 (talk | contribs) (Created page with " "Over temperature protection during discharging" {{Segway Power Station Cube Error Code SEO|7}} ==Cause== This error can be triggered when the temperature passes the rated threshold of 113f/45c while the unit is powering an external load. ==Fix== 1. Please cool down the power station. 2. Check the fan and cooling vents, and apply heat dissipation for the power station. Make sure the unit has enough airflow during operation and nothing is obstructing the vents....")
- 00:36, 24 February 2024 Segway Power Station Cube Error Code E06 (hist | edit) [518 bytes] Joeybab3 (talk | contribs) (Created page with " "Over temperature protection during charging" {{Segway Power Station Cube Error Code SEO|6}} ==Cause== This error can be triggered when the temperature passes the rated threshold of 113f/45c. ==Fix== 1. Please cool down the power station. 2. Check the fan and cooling vents, and apply heat dissipation for the power station. Make sure the unit has enough airflow during operation and nothing is obstructing the vents. Category: Segway Power Station CubeCatego...")
- 00:30, 24 February 2024 Segway Power Station Cube Error Code E05 (hist | edit) [679 bytes] Joeybab3 (talk | contribs) (Created page with " "Battery communication error 5" {{Segway Power Station Cube Error Code SEO|5}} ==Cause== This error is likely caused by a communication failure between the battery pack and the main control unit. This error is given the same solution by Segway as Segway Power Station Cube Error Code E04. ==Fix== 1. Turn off the power station and check if the battery pack is connected properly. 2. Restart the power station. Note: if the error code still exists after opera...")
- 00:29, 24 February 2024 Segway Power Station Cube Error Code E04 (hist | edit) [581 bytes] Joeybab3 (talk | contribs) (Created page with " "Battery communication error 1" {{Segway Power Station Cube Error Code SEO|4}} ==Cause== This error is likely caused by a communication failure between the battery pack and the main control unit. ==Fix== 1. Turn off the power station and check if the battery pack is connected properly. 2. Restart the power station. Note: if the error code still exists after operating with the above methods, the battery pack might have been damaged. Confirm that the connecti...")
- 00:28, 24 February 2024 Segway Power Station Cube Error Code E03 (hist | edit) [369 bytes] Joeybab3 (talk | contribs) (Created page with " "Battery undervoltage protection" {{Segway Power Station Cube Error Code SEO|3}} ==Cause== This error appears when the voltage of the battery is below the threshold. ==Fix== Please charge immediately! Plug in the battery to allow the voltage to rise over the threshold and the error should clear. Category: Segway Power Station CubeCategory: Error Code")
- 23:07, 23 February 2024 Segway Power Station Cube Error Code E02 (hist | edit) [624 bytes] Joeybab3 (talk | contribs) (Created page with " "Battery low temperature protection" {{Segway Power Station Cube Error Code SEO|2}} ==Cause== This error is likely caused by the unit being below its 14f/-10c operating temperature. ==Fix== Please make the battery back to the normal temperature. Category: Segway Power Station CubeCategory: Error Code") originally created as "Segway Power Station Cube Error Code E2"
- 23:04, 23 February 2024 List of Segway Power Station Cube Error Codes (hist | edit) [222 bytes] Joeybab3 (talk | contribs) (Created page with "Here is a list of all Segway Power Station Cube 1000/2000/BTX-1000 error codes and their causes/solutions: {{List of Segway Power Station Cube Error Codes}} Category: Segway Power Station CubeCategory: Error Code")
- 23:00, 23 February 2024 Segway Power Station Cube Error Code E01 (hist | edit) [291 bytes] Joeybab3 (talk | contribs) (Created page with " "Communication between Dashboard and Control Board is Abnormal, Please check the related connections" For the ESX/SNSC 1.0+, see Ninebot ESX Error Code 10. {{Segway Power Station Cube Error Code SEO|1}} ==Cause== ==Fix== Category: Segway Power Station CubeCategory: Error Code")
- 17:48, 7 February 2024 Epic Lab Edition Firmware 1.5.4 (hist | edit) [446 bytes] Joeybab3 (talk | contribs) (Created page with "thumb|center|200px|The update message for 1.5.4 from the JLab app. {{ JLab Epic Lab Edition Firmware Header }} '''1.5.3''' was the first update for the Epic Lab Edition. ==Official Changelog== 1. ==User Notes== None yet. Category: Firmware")