Ninebot Max G30P

The G30P or "Kickscooter Max/Ninebot Max" was the next-generation scooter released after the Ninebot ES4.

It is much more durable and features a higher capacity single battery, as well as air tires and ac/dc charging support.

The main page for guides relating to this model is at Ninebot Max Stuff.

The G30P is the global version of the max. Other versions include the G30E and G30D.

The "P" is often dropped from this version as it is the standard configuration with no additional safety restrictions or features.

Specifications

Original specs via Segway.

Ninebot G30P
Dimensions	Unfolded: ~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm) Folded: ~45.9 x 18.6 x 21.0 in (1167 x 423 x 534 mm)
Net Weight	Approx. 41.2 lbs (18.7 kg)
Rider Weight	66.1-220.5 lbs (30.0-100.0 kg)
Max Speed	Approx. 18.6 mph (30 km/h)
Advertised Range	Approx. 40.5 miles (60 km)
Max Slope	Approx. 20%
Traversable Terrain	Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature	14–104°F (-10–40°C)
Storage Temperature	-4–122°F (-20–50°C)
IP Rating	IPX5
Charge Time	Approx. 6h
Battery Voltage	36 VDC
Charging Voltage	42 VDC
Charging Temperature	32–104°F (0–40°C)
Battery Capacity	15300 mAh / 551 Wh
Motor Power	350W (Max 750W)
Internal Charger Power	121W
Internal Current	2.9A
Shocks	None
Tires	Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle

ScooterHacking.org currently has support for all generations of ESC for this model in their CFW Generator available at max.cfw.sh.

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports all generations of this model with their SHFW.

Here is a list of all Ninebot Max G30/(G30P, G30D, G30E) / SNSC 2.0 error codes and their causes/solutions: