Ninebot Max G30M

From Joey's Wiki
Jump to navigation Jump to search

The G30M or "Kickscooter Max Maserati Edition/Ninebot Max Maserati Edition" is a limited edition release of the Ninebot G30P for the Australian market.

It is much more durable and features a higher capacity single battery, as well as air tires and ac/dc charging support.

The Ninebot G30M via Fulle[1].

The main page for guides relating to this model is at Ninebot Max Stuff.

The G30M is a limited edition collaboration with car company Maserati.

Specifications

Original specs via electricdrift.

Ninebot G30M
Colour Maserati Blue
Dimensions Unfolded: 117 x 47 x 120 cm, folded 117 x 47 x 53cm
Net Weight Approx. 19.8 kg (43.7 lbs)
Max Load (Rider Weight) 120kg (265 lbs)
Max Speed 25km/h (15.5mph)
Typical Range 65 km (40.3 miles)
Max Slope 20%
Traversable Terrain Asphalt, flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature -10-40 degrees C (14-104°F)
Storage Temperature -20-50 degrees C (-4-122°F)
IP Rating IPX5 (Can resist light low-pressure water spray)
Charge Time Approx. 3.5 hrs fast charging
Battery Voltage 36V (42V Max)
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 551 Wh
Smart Battery Management System Over-heating, short circuit, over-current, and over-charge protection
Motor Power 400W
Lights LED Rear Light
Riding Modes Eco, Standard, Sport
Tires 10-inch pneumatic tires
Internal Charger Power 121W
Internal Current 2.9A

Files

Custom Firmware (CFW) Support

ScooterHacking.org currently has support for all generations of ESC for this model in their CFW Generator available at max.cfw.sh.

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports all generations of this model with their SHFW.

Error Codes

Here is a list of all Ninebot G30/Max(G30P, G30D, G30E) / SNSC 2.0 error codes and their causes/solutions:

(Includes the G30M/Maserati)