Ninebot ESX Error Code 26

From Joey's Wiki
Jump to navigation Jump to search
Error 26 on a Ninebot ESX.
"Flash Storage Error, Please check the Control Board"

If your Segway Ninebot ESX(ES1, ES2, ES3, or ES4) or Segway SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 25 - Next Error Code: Ninebot ESX Error Code 27


The cause of this error is not yet known.


Try flashing the ESX again using the guide at Flash Ninebot ESX ESC.

if that doesn't work, you may need to STLink using the guide at STLink Ninebot ESX ESC instead.