Ninebot ES2

From Joey's Wiki
Jump to navigation Jump to search

The ES2 is a budget scooter made by Ninebot.

It is the second of the "KickScooter" series also known as the KS or ES(Electric Scooter) series.

Attaching a battery to an ES2 makes it into a Ninebot ES4.

This scooter was superseded by the Ninebot G30P, and preceded by the Ninebot ES1.

The Ninebot ES2 via Segway[1].

The main page for guides relating to this model is at Ninebot ESX Stuff.

Specs

Original specs via Segway.

Ninebot ES2
Dimensions Unfolded: Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Folded: Approx. 45 × 17 × 16 in (113 × 43 × 40 cm)
Net Weight Approx. 27.6 lbs (12.5 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 15.5 mph (25 km/h)
Advertised Range Approx. 15.5 miles (25 km)
Max Slope Approx. 10%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IP54
Charge Time Approx. 3.5h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 5200 mAh / 187 Wh
Motor Power 300W
Charger Power 71W
Charger Current 1.7A
Shocks Front and Rear

Manuals

Modding

This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking's SHFW also supports this model.

ScooterHacking features more in-depth information on this model on their ESX Wiki Page.

Serial Prefixes

  • N2GW - Black ES2
  • N2GK - Black ES2
  • N2GN - Black ES2
  • N2GT - Silver ES2