STLink Ninebot ESX External BMS: Difference between revisions
(Created page with "In the case of a bricked '''BMS/Battery''', STLinking can save the battery from needing to be replaced in some instances. This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. This guide shows how to STLink the battery/BMS for the following scooters: {{Ninebot ESX Series Model List}} ==Accessing the Debug Pins== Two screws hold the battery on the bracket. These are either security hex or regular he...") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. | This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. | ||
This guide shows how to STLink the battery/BMS for the following scooters: | This guide shows how to STLink the [[Ninebot NEB1002-H1]] battery/BMS for the following scooters: | ||
{{Ninebot ESX Series Model List}} | {{Ninebot ESX Series Model List}} | ||
| Line 17: | Line 17: | ||
===Dissassembling the Battery=== | ===Dissassembling the Battery=== | ||
[[Category: Scooters]][[Category: Ninebot]][[Category: ESX]] | [[Category: Scooters]][[Category: Ninebot]][[Category: ESX]][[Category: STLink]] | ||
Latest revision as of 02:05, 21 July 2023
In the case of a bricked BMS/Battery, STLinking can save the battery from needing to be replaced in some instances.
This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed.
This guide shows how to STLink the Ninebot NEB1002-H1 battery/BMS for the following scooters:
Retail Specific
Rental Specific
Accessing the Debug Pins
Two screws hold the battery on the bracket.
These are either security hex or regular hex.
