STLink Ninebot ESX External BMS

From Joey's Wiki
Revision as of 22:46, 31 May 2023 by Joeybab3 (talk | contribs) (Created page with "In the case of a bricked '''BMS/Battery''', STLinking can save the battery from needing to be replaced in some instances. This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. This guide shows how to STLink the battery/BMS for the following scooters: {{Ninebot ESX Series Model List}} ==Accessing the Debug Pins== Two screws hold the battery on the bracket. These are either security hex or regular he...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In the case of a bricked BMS/Battery, STLinking can save the battery from needing to be replaced in some instances.

This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed.

This guide shows how to STLink the battery/BMS for the following scooters:

Retail Specific

Rental Specific

Accessing the Debug Pins

Two screws hold the battery on the bracket.

These are either security hex or regular hex.

The two screws holding the external battery on the bracket.

Dissassembling the Battery

Retrieved from "https://joeybabcock.me/wiki/index.php?title=STLink_Ninebot_ESX_External_BMS&oldid=1612"