Ninebot SNSC 1.0
The SNSC 1.0 is a budget scooter made by Ninebot.
It is the rental version, most similar to the Ninebot ESX series.
The 250W versions were similar to the Ninebot ES1 or, if it had an external battery as most did, the Ninebot ES3.
For the 300W models, their equivalents were the Ninebot ES2, and Ninebot ES4.
These models did not fold but were otherwise compatible with most ESX hardware.
Specs
Dimensions | Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) |
Net Weight | Approx. 30.9 lbs (14.0 kg) |
Rider Weight | 55–220 lbs (25–100 kg) |
Max Speed | Approx. 18.6 mph (30 km/h) |
Advertised Range | Approx. 28.0 miles (45 km) |
Max Slope | Approx. 15% |
Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
Operating Temperature | 14–104°F (-10–40°C) |
Storage Temperature | |
IP Rating | IP54 |
Charge Time | Approx. 7h |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32–104°F (0–40°C) |
Battery Capacity | 10400 mAh / 374 Wh |
Motor Power | 300W |
Charger Power | 71W |
Charger Current | 1.7A |
Shocks | Front and Rear |
Modding
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
ScooterHacking's SHFW also supports this model.