Ninebot ESX Error Code 48

From Joey's Wiki
Revision as of 20:38, 9 February 2022 by Joeybab3 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Error 48 on a Ninebot ESX.
"External battery protection board damaged - Please replace battery."

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 47 - Next Error Code: Ninebot ESX Error Code 49


The external battery protection board may actually be damaged, but it is more likely that the battery just got too low.


Leave it on the charger for a while and make sure that the terminals are clean.

Check Ninebot ESX Error Code 42 for examples of how the terminals look when not clean.