Ninebot ESX Error Code 29
If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.
"Motor MOS driver Lower Bridge Error, Please check the Control Board"
If you clicked the wrong error code, go back to the Error Code Index.
Previous Error Code: Ninebot ESX Error Code 28 - Next Error Code: Ninebot ESX Error Code 30
Cause
Fix
An error 29 will likely require replacing the control board.