Ninebot Max G65: Difference between revisions

Revision as of 17:56, 10 January 2025

The Ninebot G65 or "Kickscooter Max+/Ninebot Max+" was the next-generation scooter released after the Ninebot Max.

It seems to have been a cross between a Ninebot G2 body and Ninebot G30 internals.

The main page for guides relating to this model is at Ninebot Max Stuff.

This model was only offered for sale in the AU and NZ regions.

Original specs via Segway.

Ninebot G65
Dimensions	Unfolded: 1190 x 520 x 1270 mm
Net Weight	24.4 kg
Rider Weight	120 kg
Max Speed	25 km/h
Advertised Range	35-65 km
Max Slope	20%
Traversable Terrain	Bicycle lanes, parks, campuses and most of the flat road conditions and typical Belgian roads
Operating Temperature	-10–40°C
Storage Temperature	-10–50°C
IP Rating	IPX5
Charge Time	Approx. 5 hours
Battery Voltage	36 V
Charging Voltage	42 V
Charging Temperature	Not specified
Battery Capacity	551 Wh
Motor Power	450W (Max 700W)
Internal Charger Power	Not specified
Internal Current	2.9 A
Shocks	None
Tires	Self-sealing tubeless tires, 10 inch

ScooterHacking.org currently has support for all generations of ESC for this model in their CFW Generator available at max.cfw.sh.

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports all generations of this model with their SHFW.

Here is a list of all Ninebot Max G30/(G30P, G30D, G30E) / SNSC 2.0 error codes and their causes/solutions:

@@ Line 38: / Line 38: @@
 |-
 |Operating Temperature
-|-10–40°C
+| -10–40°C
 |-
 |Storage Temperature
-|-10–50°C
+| -10–50°C
 |-
 |IP Rating