Ninebot NEE1006-M1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
[[File:NinebotNEE1006-M1.png|thumb|400px|center|The Ninebot NEE1006-M1 via Segway[https://b2b.segway.com/segway-battery-pack/].]] | [[File:NinebotNEE1006-M1.png|thumb|400px|center|The Ninebot NEE1006-M1 via Segway[https://b2b.segway.com/segway-battery-pack/].]] | ||
This battery was designed to be the removable equivalent to the batteries used in the [[Ninebot SNSC 2.0|SNSC 2.0]] and [[Ninebot SNSC 2.1|SNSC 2.1]]. | |||
It can be used in removable battery scooters such as the [[Ninebot SNSC 2.2|SNSC 2.2]], [[Ninebot SNSC 2.3|SNSC 2.3]], and [[Ninebot SNSC 2.4|SNSC 2.4]]. | |||
==Specs== | ==Specs== |
Revision as of 21:44, 1 February 2023
The Ninebot NEE1006-M1 is the smaller of the two currently offered removable batteries from Ninebot.
It is the removable version of the Ninebot NEE1006-M.
This battery was designed to be the removable equivalent to the batteries used in the SNSC 2.0 and SNSC 2.1.
It can be used in removable battery scooters such as the SNSC 2.2, SNSC 2.3, and SNSC 2.4.
Specs
Original specs via Segway.
Dimensions | 423mm×130mm×78mm |
Weight | 6kg |
Rated Capacity | 15.3Ah |
Rated Power | 551Wh |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32–104°F (0–40°C) |
Range* | 60km |
Cells Used | EVE / FAR EAST |
Cell Size | 18650 |
Waterproof Rating | IPX7 |
Range*: Max plus, 25 degrees c, windless, 75kg weight, 16km/h measured at a consistent speed.
BMS Firmware
This battery is based on the STM8 family of MCU and is compatible with standard G30 BMS Firmware.
Inside the case is the same PCB layout as the Ninebot NEE1006-M.