Ninebot SNSC 2.4
The SNSC 2.4 or "Max Plus X" is Ninebot's latest rental/sharing scooter from ninebot.
It succeeds the Ninebot SNSC 2.3 and is succeeded by the Ninebot S90L.

This model features a phone holder on the top and an improved rear mudguard.
Specs
Original specs via Segway.
Net Weight | Approx. 69.5 lbs (31.5 kg) |
Max Speed | Approx. 15.5 mph (25 km/h) |
Advertised Range | Approx. 50km / 31.6 miles, older versions of the page state 55km / 34.1 miles |
Charge Time | Approx. 4h |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32–104°F (0–40°C) |
Battery Capacity | Depends on battery pack purchased** |
Motor Power | 400W |
Suspension | Front |
Dimensions | 1196 × 556 × 1219 mm |
IP Rating | IPX4 Body, IPX7 Battery |
**Note on battery: Segway offers two different swappable battery packs, the Ninebot NEE1006-M1 and Ninebot NFCP3628B.
These packs have 551Wh/1003Wh or 15300mAh/27800mAh for advertised 60km/100km ranges.
The scooter's main page notes that it has a typical range lower than both though at 50km (previously listed at 55km).
Battery
This model works with removable ninebot batteries:
Brochure
File:NinebotSNSC2.4Brochure.pdf
Custom Firmware (CFW) Support
ScooterHacking.org does not support this model with CFW.
ScooterHacking also does not support this model with their SHFW.
Flashing firmware for the 2.0 may work, but it often results in errors such as Ninebot Max Error Code 45.
Serial Prefix/Region
SNSC 2.4: A5S0