Ninebot SNSC 2.1

From Joey's Wiki
Jump to navigation Jump to search

The SNSC 2.1 appears to be the same as the Ninebot SNSC 2.0 or Ninebot Max.

The SNSC 2.0/2.1 are the rental/sharing versions of the Ninebot Max/G30.

It appears to be similar to the differences between the Ninebot SNSC 1.0/Ninebot SNSC 1.1.

This model is succeeded by the Ninebot SNSC 2.2.

File:NinebotSNSC2.1.png
The Ninebot Max/SNSC 2.1 via Segway[1].

Specifications

Original specs via Segway.

Ninebot SNSC 2.1
Dimensions ~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm)
Net Weight Approx. 41.2 lbs (18.7 kg)
Rider Weight 66.1-220.5 lbs (30.0-100.0 kg)
Max Speed Approx. 18.6 mph (30 km/h)
Advertised Range Approx. 40.5 miles (60 km)
Max Slope Approx. 20%
Traversable Terrain Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature -4–122°F (-20–50°C)
IP Rating IPX5
Charge Time Approx. 6h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 15300 mAh / 551 Wh
Motor Power 350W (Max 750W)
Internal Charger Power 121W
Internal Current 2.9A
Shocks None
Tires Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle

Conversion

This series has the same board layout as the retail G30 and so it can be STLinked to give it retail functionality.

The following links are also valid for this series:

Custom Firmware (CFW) Support

ScooterHacking.org currently has support for the first gen ESC of this model in their CFW Generator available at max.cfw.sh.

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once Converted using the guides above, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports this model with their SHFW.

Serial Prefix/Region

Helbiz SNSC 2.1: N4LQ