Ninebot ES3

From Joey's Wiki
(Redirected from Ninebot ES3 Plus)
Jump to navigation Jump to search

The ES3 is a budget scooter made by Ninebot.

It is the first version of the "KickScooter" series also known as the KS or ES(Electric Scooter) series.

Attaching a NEB1002-H1 battery to a Ninebot ES1 makes it a Ninebot ES3.

This scooter was superseded by the Ninebot ES4.

The Ninebot ES3 via Segway[1].

Costco had its own version of the ES3 called the "ES3 Plus".

The main page for guides relating to this model is at Ninebot ESX Stuff.


Original specs via Segway.

Ninebot ES3
Dimensions Unfolded: Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Folded: Approx. 45 × 17 × 16 in (113 × 43 × 40 cm)
Net Weight Approx. 30.9 lbs (14.0 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 18.6 mph (30 km/h)
Advertised Range Approx. 28.0 miles (45 km)
Max Slope Approx. 15%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IP54
Charge Time Approx. 7h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10400 mAh / 374 Wh
Motor Power 300W
Charger Power 71W
Charger Current 1.7A
Shocks Front and Rear



This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking's SHFW also supports this model.

ScooterHacking features more in-depth information on this model on their ESX Wiki Page.

Serial Prefixes

  • N6GA - Costco ES3 Plus
  • N2GC - Black ES3