Ninebot SNSC 2.0
The SNSC 2.0 or "Ninebot Max" is the rental/sharing version of the Ninebot Max/G30.
It succeeds the SNSC 1.0/1.1 and is much more sturdy.
This model is succeeded by the Ninebot SNSC 2.2.
Specifications
Original specs via Segway.
Dimensions | ~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm) |
Net Weight | Approx. 41.2 lbs (18.7 kg) |
Rider Weight | 66.1-220.5 lbs (30.0-100.0 kg) |
Max Speed | Approx. 18.6 mph (30 km/h) (depends on regional configuration) |
Advertised Range | Approx. 40.5 miles (60 km) |
Max Slope | 14% |
Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
Operating Temperature | 14-104°F (-10-40°C) |
Storage Temperature | -4-122°F (-20-50°C) |
IP Rating | IPX5 |
Charge Time | Approx. 6h |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32-104°F (0-40°C) |
Battery Capacity | 15300 mAh / 551 Wh |
Motor Power | 350W (Max 750W) |
Internal Charger Power | 121W |
Internal Current | 2.9A |
Shocks | None |
Tires | Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle |
Brochure
File:NinebotSNSC2.0Brochure.pdf
Conversion
This series has the same board layout as the retail G30 and so it can be STLinked to give it retail functionality.
The following links are also valid for this series:
Custom Firmware (CFW) Support
ScooterHacking.org currently has support for all generations of ESC for this model in their CFW Generator available at max.cfw.sh.
For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.
Once converted, CFW can be generated and flashed using the guides below:
CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.
ScooterHacking also supports all generations of this model with their SHFW.
Serial Prefix/Region
- Lyft SNSC 2.0: N4LYL
- Spin SNSC 2.0: N4LPL