Ninebot SNSC 1.0: Difference between revisions

Jump to navigation Jump to search

Ninebot SNSC 1.0 (view source)

Revision as of 21:50, 21 September 2023

1,653 bytes added ,  21 September 2023
no edit summary
(Created page with "The SNSC 1.0 is a budget scooter made by Ninebot. It is the rental version, most similar to the Ninebot ESX series. The 250W versions were similar to the Ninebot ES1 or, if it had an external battery as most did, the Ninebot ES3. thumb|512px|center|The Ninebot SNSC 1.0 via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg]. These models did not fold but were otherw...")
 
No edit summary
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
The SNSC 1.0 is a budget scooter made by Ninebot.  
The '''SNSC 1.0''' is a budget scooter made by Ninebot.  


It is the rental version, most similar to the Ninebot ESX series.
It is the rental version, most similar to the Ninebot ESX series.


The 250W versions were similar to the [[Ninebot ES1]] or, if it had an external battery as most did, the [[Ninebot ES3]].
The 250W versions were similar to the [[Ninebot ES1]] or, if it had an external battery as most did, the [[Ninebot ES3]].
For the 300W models, their equivalents were the [[Ninebot ES2]], and [[Ninebot ES4]].
This model was succeeded by the [[Ninebot SNSC 2.0|SNSC 2.0]].


[[File:NinebotSNSC1.0.jpg|thumb|512px|center|The Ninebot SNSC 1.0 via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg].]]
[[File:NinebotSNSC1.0.jpg|thumb|512px|center|The Ninebot SNSC 1.0 via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg].]]


These models did not fold but were otherwise compatible with most ESX hardware.
These models did not fold but were otherwise compatible with most ESX hardware.
Some of these models included the RGB deck lights/underglow LEDs but many later units did not.
==Specs==
{| class="wikitable"
|+Ninebot SNSC 1.0
|-
|Dimensions
|Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
|-
|Net Weight
|Approx. 30.9 lbs (14.0 kg)
|-
|Rider Weight
|55–220 lbs (25–100 kg)
|-
|Max Speed
|Approx. 18.6 mph (30 km/h)
|-
|Advertised Range
|Approx. 28.0 miles (45 km)
|-
|Max Slope
|Approx. 15%
|-
|Traversable Terrain
|Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
|-
|Operating Temperature
|14–104°F (-10–40°C)
|-
|Storage Temperature
| -4–122°F (-20–50°C)
|-
|IP Rating
|IP54
|-
|Charge Time
|Approx. 7h
|-
|Battery Voltage
|36 VDC
|-
|Charging Voltage
|42 VDC
|-
|Charging Temperature
|32–104°F (0–40°C)
|-
|Battery Capacity
|10400 mAh 374 Wh <br/> (via 2 batteries at 5100mAh/172Wh)
|-
|Motor Power
|300W
|-
|Charger Power
|71W
|-
|Charger Current
|1.7A
|}
==Notes on Bird ES4-800==
This model was used exclusively for rental use.
Bird did sell off their overstock of '''SNSC 1.0''' vehicles at stores such as Walmart, Best Buy, Sam's Club, etc...
Because of this, there are some listings for it under the model names:
*Bird ES1-300
*Bird ES1-300RN (Renewed)
*Bird ES4-800
*Bird ES4-800RN (Renewed)
The only difference is that the ES1-300 did not include an external battery.
Other than that these models are part-for-part compatible with other SNSC 1.0 and ESX series scooters from Segway.
[[File: BirdES4-800.jpg|thumb|center|256px|The "Bird ES4-800", which was similar to the ES3.]]


==Modding==
==Modding==


This model has custom firmware support from [https://scooterhacking.org/ ScooterHacking].
{{ESX-like CFW Support}}


The Custom Firmware Generator can be found [https://esx.cfw.sh/ here].
==Serial Prefix/Region==


ScooterHacking's [[SHFW]] also supports this model.
*'''N2GR''' - Bird ES4/SNSC 1.0 - Now used for [[Ninebot E45D]]
*'''N2LY''' - Lyft SNSC 1.0


[[Category: Scooters]][[Category: Ninebot]]
[[Category: Scooters]][[Category: Ninebot]]
Joeybab3
Administrators, Swags, Bureaucrats, Administrators
2,811

edits

Retrieved from "https://joeybabcock.me/wiki/Special:MobileDiff/575...2243"

Navigation menu