Ninebot S100
The Ninebot S100 or Max S100 is an AI-equipped rental scooter, with a similar build to the Ninebot Max Plus X.
It succeeds the S90L and adds a full-color LCD display.
Ninebot advertises some of its main improvements as "lane detection, parking detection, and dash cam technology".
Specifications
Original specs via Segway
| Net Weight | Approx. 66.1 lbs (~30 kg) |
| Max Payload/Rider Weight | ≤220 lbs (100.0kg) |
| Max Speed | Approx. 15.5 mph (25 km/h) |
| Rated Range | 55km *Depends on battery pack used |
| Dimensions (L x W x H) | 1196 X 593 X 1226 mm |
| Frame Material | Aluminum alloy |
| Suspension | Front hydraulic suspension and Rear suspension |
| Kickstand | Dual kickstand |
| Motor Power (Rated) | 400W |
| Driven Mode | Rear-wheel drive |
| Max. Slope | 14% (Approx. 8°) |
| Front Brake | Drum Brake |
| Rear Brake | Drum Brake + Electronic Brake |
| Tires | PU Filled Rubber; Front: 11.5-in (60/55-8.5), Rear: 10.5-in (60/55-7.5) |
| Battery Capacity | 551Wh *Depends on battery pack used |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Time | Approx. 4h |
| Architecture | 36v CAN |
| IoT Module | G3Sg IoT |
| Dashboard Type | LCD Dashboard |
| Front & Rear Turn Lights | Integrated on the handlebar |
| Waterproof Rating | Controller, Battery Pack, Motor & Dashboard: IPX7; Vehicle Body: IPX5 |
| Operating Temperature | 14–104°F (-10–40°C) |
| Charging Temperature | 32–104°F (0–40°C) |
Serial Prefix/Region
Custom Firmware (CFW) Support
ScooterHacking.org does not support this model with CFW.
ScooterHacking also does not support this model with their SHFW.