Ninebot Max G2D

The Ninebot Max G2 D is an upgraded version of the consumer Ninebot G30D/Ninebot G30D II.

There are a number of names given to this model including:

Ninebot G2D
Ninebot Max 2D
Ninebot Max G2D
Ninebot Max G II D (Not to be confused with the Ninebot G30D II and related variants)

And several others... For this reason, I will refer to it as the Max G2 as that's what the new IndieGoGo campaign calls it.

It is much more durable and features a higher capacity single battery, as well as air tires and AC/DC charging support.

The D in the model number signifies that this is the German variation of this scooter.

The worldwide variation of this vehicle is the Ninebot Max G2, and the European variation is the Ninebot Max G2E.

Specifications

Original specs Segway.

Ninebot G2D
Dimensions	Unfolded: ~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm) Folded: ~45.9 x 18.6 x 21.0 in (1167 x 423 x 534 mm)
Net Weight	Approx. 53.5 lbs (24.2 kg)
Rider Weight	66.1-220.5 lbs (30.0-100.0 kg)
Max Speed	Approx. 12.5 mph (20 km/h)
Advertised Range	Approx. 43.5 miles (70 km)
Max Slope	Approx. 22%
Traversable Terrain	Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature	14–104°F (-10–40°C)
Storage Temperature	-4–122°F (-20–50°C)
IP Rating	IPX5
Charge Time	Approx. 12h (5h fast charge)
Battery Voltage	36 VDC
Charging Voltage	42 VDC
Charging Temperature	32–104°F (0–40°C)
Battery Capacity	15300 mAh / 551 Wh
Motor Power	450W (Max 1000W)
Internal Charger Power	121W
Internal Current	2.9A
Shocks	Front Hydraulic + Rear Spring Suspension
Tires	Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle

ScooterHacking supports all generations of this model with their SHFW.

ScooterHacking.org currently does not support this model in their CFW Generator available at max.cfw.sh.

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

This CFW can be generated and flashed using the guides below: