Ninebot G30LD II

From Joey's Wiki
Jump to navigation Jump to search

The G30LD II is a cheaper, lighter version of the Ninebot G30D II, and the second generation body of the Ninebot G30LD.

It features similar hardware to the Ninebot G30D in many ways but with the following differences:

  • Smaller frame
  • Smaller Battery
  • Lighter
  • No AC Charging (Must use external charging brick)

It is the second body revision of the Ninebot G30LD, with only minor cosmetic differences from the previous version.

File:NinebotG30LDII.png
The Ninebot G30LD II via Segway[1].

The main page for guides relating to this model is at Ninebot Max Stuff.

Specifications

Original specs via Segway.

Ninebot G30LD II
Dimensions Unfolded: Approx. 43.7in x 18.6in x 45.1in (1109 × 472 × 1146 mm)
Folded: Approx. 43.7in x 18.6in x 21.0in (1109 × 472 × 534mm)
Net Weight Approx. 38.6lbs (17.5 kg)
Rider Weight 66.1 - 220.5lbs (30.0 - 100.0kg)
Max Speed Approx. 12.5 mph (20 km/h)
Advertised Range Approx. 24.9 miles (40 km)
Max Slope Approx. 20%
Traversable Terrain Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IPX5
Charge Time Approx. 6.5h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10200 mAh / 367 Wh
Motor Power 350W (Max 750W)
Charger Power 71W
Charger Current 1.7A
Shocks None
Tires Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle

Custom Firmware (CFW) Support

ScooterHacking.org currently has support for the first gen ESC of this model in their CFW Generator available at max.cfw.sh.

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports this model with their SHFW.