Ninebot G30LD

From Joey's Wiki
Jump to navigation Jump to search

The G30LD is a cheaper, lighter version of the Ninebot G30D.

It was succeeded (cosmetically anyways) by the Ninebot G30LD II.

It features similar hardware to the G30D in most ways but with the following differences:

  • Smaller frame
  • Smaller Battery
  • Lighter
  • No AC Charging (Must use external charging brick)
The Ninebot G30LD via Segway[1].

The main page for guides relating to this model is at Ninebot Max Stuff.


Original specs via Segway.

Ninebot G30LD
Dimensions Unfolded: Approx. 43.7in x 18.6in x 45.1in (1109mm × 472mm × 1146 mm)
Folded: Approx. 43.7in x 18.6in x 21.0in (1109mm × 472mm × 534mm)
Net Weight Approx. 38.6lbs (17.5 kg)
Rider Weight 66.1 - 220.5lbs (30.0 - 100.0kg)
Max Speed Approx. 12.5 mph (20 km/h)
Advertised Range Approx. 24.9 miles (40 km)
Max Slope Approx. 20%
Traversable Terrain Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature -4–122°F (-20–50°C)
IP Rating IPX5
Charge Time Approx. 6.5h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10200 mAh / 367 Wh
Motor Power 350W (Max 750W)
Charger Power 71W
Charger Current 1.7A
Shocks None
Tires Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle
10" / 25.4cm

Custom Firmware (CFW) Support currently has support for the first gen ESC of this model in their CFW Generator available at

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports this model with their SHFW.