Wyse 5060 RAM Upgrade

This page shows how to upgrade the ram on the Dell Wyse 5060/N07D.

Dissassembly

To start, 3 screws hold the front cover in place. Use a small Phillips head screwdriver to remove them.

The 3 screws to remove.

Next slide the front cover off.

Push down lightly and then slide the front cover off.

Underneath the front panel are 5 screws holding on a structural/protective cover. Remove these and slide the cover in the direction of the arrow etched on the board.

File:DellWyse5060protectivePanelScrews.jpg

The 5 screws to remove the protective panel.