Segway Power Station Cube Firmware: Difference between revisions

From Joey's Wiki
Jump to navigation Jump to search
Line 15: Line 15:
*[[Segway Power Station Cube INV2 3.3.4|Segway Power Station Cube INV2 V3.3.4]]
*[[Segway Power Station Cube INV2 3.3.4|Segway Power Station Cube INV2 V3.3.4]]
*[[Segway Power Station Cube INV2 3.3.7|Segway Power Station Cube INV2 V3.3.7]]
*[[Segway Power Station Cube INV2 3.3.7|Segway Power Station Cube INV2 V3.3.7]]
*[[Segway Power Station Cube INV2 3.3.11|Segway Power Station Cube INV2 V3.3.11/V3.3.B]]


==DC Controller/PV Firmware==
==DC Controller/PV Firmware==

Revision as of 19:09, 19 January 2024

Firmware is essentially the Operating System for the power station's different parts.

Each part runs a different firmware. If you need to find a changelog relating to the original firmware for the Segway Cube Power Station 1000/2000, this is the place.

Below is a list of all firmware versions(BMS, BLE, etc) for this model:

Inverter 1/INV1 Firmware

Inverter 2/INV2 Firmware

DC Controller/PV Firmware

BMS/Battery Firmware

Master Control/MCU Firmware

BLE Firmware

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Firmware&oldid=2516"