Segway Power Station Cube Firmware
Jump to navigation
Jump to search
Firmware is essentially the Operating System for the power station's different parts.
Each part runs a different firmware. If you need to find a changelog relating to the original firmware for the Segway Cube Power Station 1000/2000, this is the place.
Below is a list of all firmware versions(BMS, BLE, etc) for this model:
Inverter 1/INV1 Firmware
- Segway Power Station Cube INV1 V3.3.6
- Segway Power Station Cube INV1 V3.3.10/V3.3.A
- Segway Power Station Cube INV1 V3.4.1
- Segway Power Station Cube INV1 V3.4.3
Inverter 2/INV2 Firmware
- Segway Power Station Cube INV2 V3.3.4
- Segway Power Station Cube INV2 V3.3.7
- Segway Power Station Cube INV2 V3.3.11/V3.3.B
- Segway Power Station Cube INV2 V3.3.13/V3.3.D
DC Controller/PV Firmware
- Segway Power Station Cube PV V1.0.7
- Segway Power Station Cube PV V1.0.9
- Segway Power Station Cube PV V1.0.10/V1.0.A
- Segway Power Station Cube PV V1.0.11/V1.0.B
- Segway Power Station Cube PV V1.1.0
BMS/Battery Firmware
- Segway Power Station Cube BMS V1.2.2
- Segway Power Station Cube BMS V1.2.3
- Segway Power Station Cube BMS V1.2.9
- Segway Power Station Cube BMS V1.2.11/V1.2.B
Master Control/MCU Firmware
- Segway Power Station Cube MCU V1.1.1
- Segway Power Station Cube MCU V1.1.4
- Segway Power Station Cube MCU V1.1.7
- Segway Power Station Cube MCU V1.1.8
- Segway Power Station Cube MCU V1.1.11/V1.1.B
- Segway Power Station Cube MCU V1.1.13/V1.1.D