Segway Power Station Cube Firmware: Difference between revisions

From Joey's Wiki
Jump to navigation Jump to search
Line 9: Line 9:
*[[Segway Power Station Cube INV1 3.3.6|Segway Power Station Cube INV1 V3.3.6]]
*[[Segway Power Station Cube INV1 3.3.6|Segway Power Station Cube INV1 V3.3.6]]
*[[Segway Power Station Cube INV1 3.3.10|Segway Power Station Cube INV1 V3.3.10/V3.3.A]]
*[[Segway Power Station Cube INV1 3.3.10|Segway Power Station Cube INV1 V3.3.10/V3.3.A]]
*[[Segway Power Station Cube INV1 3.4.1|Segway Power Station Cube INV1 V3.4.1]]


==Inverter 2/INV2 Firmware==
==Inverter 2/INV2 Firmware==

Revision as of 19:08, 19 January 2024

Firmware is essentially the Operating System for the power station's different parts.

Each part runs a different firmware. If you need to find a changelog relating to the original firmware for the Segway Cube Power Station 1000/2000, this is the place.

Below is a list of all firmware versions(BMS, BLE, etc) for this model:

Inverter 1/INV1 Firmware

Inverter 2/INV2 Firmware

DC Controller/PV Firmware

BMS/Battery Firmware

Master Control/MCU Firmware

BLE Firmware

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Firmware&oldid=2515"