Segway Power Station Cube Error Code E14

From Joey's Wiki
Revision as of 00:56, 24 February 2024 by Joeybab3 (talk | contribs) (Created page with " "Inverter malfunction" {{Segway Power Station Cube Error Code SEO|14}} ==Cause== This error signals a problem with the power station's internal inverter, which converts DC power from the battery to AC power. ==Fix== "Disconnect the AC devices. Turn o� the AC output after 5 seconds and try again later." * Disconnect all AC devices. * Turn off the AC output, wait for 5 seconds and try turning it on again. * If the error persists, contact technical support for fur...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"Inverter malfunction"

If your Segway Power Station Cube is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Power Station Cube Error Code Index.

Previous Error Code: Segway Power Station Cube Error Code E13 - Next Error Code: Segway Power Station Cube Error Code E15

Cause

This error signals a problem with the power station's internal inverter, which converts DC power from the battery to AC power.

Fix

"Disconnect the AC devices. Turn o� the AC output after 5 seconds and try again later."
  • Disconnect all AC devices.
  • Turn off the AC output, wait for 5 seconds and try turning it on again.
  • If the error persists, contact technical support for further assistance.
Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Error_Code_E14&oldid=2649"