Segway Power Station Cube Error Code E11

From Joey's Wiki
Revision as of 00:49, 24 February 2024 by Joeybab3 (talk | contribs) (Created page with " "USB output overload or short-circuit" {{Segway Power Station Cube Error Code SEO|11}} ==Cause== This error is likely caused by the USB ports drawing more than 3A on the USB-A ports or more than 5A on the USB-C ports. ==Fix== Disconnect the USB devices Make sure the devices connected to the USB ports are not drawing more than the rated amperage and that there are no issues with the cables connecting them. Category: Segway Power Station CubeCategory: Error...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"USB output overload or short-circuit"

If your Segway Power Station Cube is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Power Station Cube Error Code Index.

Previous Error Code: Segway Power Station Cube Error Code E10 - Next Error Code: Segway Power Station Cube Error Code E12

Cause

This error is likely caused by the USB ports drawing more than 3A on the USB-A ports or more than 5A on the USB-C ports.

Fix

Disconnect the USB devices

Make sure the devices connected to the USB ports are not drawing more than the rated amperage and that there are no issues with the cables connecting them.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Segway_Power_Station_Cube_Error_Code_E11&oldid=2644"