Segway Power Station Cube Error Code E02: Difference between revisions
Jump to navigation
Jump to search
m (Joeybab3 moved page Segway Power Station Cube Error Code E2 to Segway Power Station Cube Error Code E02) |
No edit summary |
||
| Line 10: | Line 10: | ||
Please make the battery back to the normal temperature. | Please make the battery back to the normal temperature. | ||
Per Segway: | |||
"[...] You can still use Cube in the winter, even if the temperature drops below 40°F, and the lowest discharge temperature of Cube is approximately -4℉, while the lowest charge temperature is about 38℉." | |||
If the unit is within these ranges then it may have a faulty temperature sensor. | |||
[[Category: Segway Power Station Cube]][[Category: Error Code]] | [[Category: Segway Power Station Cube]][[Category: Error Code]] | ||
Latest revision as of 22:10, 26 February 2024
"Battery low temperature protection"
If your Segway Power Station Cube is beeping or has a red wrench icon and flashes this code, read below.
If you clicked the wrong error code, go back to the Power Station Cube Error Code Index.
Previous Error Code: Segway Power Station Cube Error Code E01 - Next Error Code: Segway Power Station Cube Error Code E03
Cause
This error is likely caused by the unit being below its 14f/-10c operating temperature.
Fix
Please make the battery back to the normal temperature.
Per Segway:
"[...] You can still use Cube in the winter, even if the temperature drops below 40°F, and the lowest discharge temperature of Cube is approximately -4℉, while the lowest charge temperature is about 38℉."
If the unit is within these ranges then it may have a faulty temperature sensor.