Administrators, Swags, Bureaucrats, Administrators
2,822
edits
STLink Ninebot ESX Internal BMS: Difference between revisions
no edit summary
(Created page with "In the case of a bricked '''BMS/Battery''', STLinking can save the battery from needing to be replaced in some instances. This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. This guide shows how to STLink the battery/BMS for the following scooters: {{Ninebot ESX Series Model List}} ==Accessing the Debug Pins== ===Removing the Pole=== Remove the 4x Security Torx T25 screws or Hex Screws that hold...") |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. | This is often the only way to save a board that has been bricked when the wrong firmware was flashed or an update failed. | ||
This guide shows how to STLink the battery/BMS for the following scooters: | This guide shows how to STLink the [[Ninebot NEB1002-H]] battery/BMS for the following scooters: | ||
{{Ninebot ESX Series Model List}} | {{Ninebot ESX Series Model List}} | ||
| Line 21: | Line 21: | ||
[[File: NinebotEsxRearPoleScrews.jpg|thumb|center|400px|The rearpole screws in place.]] | [[File: NinebotEsxRearPoleScrews.jpg|thumb|center|400px|The rearpole screws in place.]] | ||
===Accessing the | ===Accessing the BMS=== | ||
Next, if you have one, remove the external battery. | Next, if you have one, remove the external battery. | ||
| Line 73: | Line 73: | ||
===Dissassembling the Battery=== | ===Dissassembling the Battery=== | ||
[[Category: Scooters]][[Category: Ninebot]][[Category: ESX]] | [[Category: Scooters]][[Category: Ninebot]][[Category: ESX]][[Category: STLink]] | ||