STLink Ninebot ESX ESC: Difference between revisions
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
===Accessing the ESC=== | ===Accessing the ESC=== | ||
Remove the 4x Security Torx T25 screws that hold the handlebar in place on the pole. | |||
[[File: NinebotEsxHandlebarScrews.jpg|thumb|center|400px|The handlebar screws in place.]] | |||
===Dissassembling the ESC=== | ===Dissassembling the ESC=== | ||
Revision as of 01:40, 30 March 2021
In the case of a bricked ESC/Controller/Control Board, STLinking can save the controller from needing to be replaced in some instances.
Accessing the Debug Pins
Accessing the ESC
Remove the 4x Security Torx T25 screws that hold the handlebar in place on the pole.
Dissassembling the ESC
Software
Download STM32 STLink Utility from the ST website.
Scroll down and click "Get Software" and enter your email to receive a download link.
Install it and open it.