Administrators, Swags, Bureaucrats, Administrators
2,822
edits
Replace Ninebot ESX Kickstand: Difference between revisions
Created page with "This page covers how to replace the kickstand on the following models: Ninebot ES1, Ninebot ES2, Ninebot ES3, Ninebot ES4, SNSC 1.0, SNSC 1.1. ==Removing the Old Kickstand== Carefully peel back the footmat making sure not to tear the rubber. thumb|center|400px|The 3 screws underneath the footmat. There are three hex/Allen M2.5/2.5mm machine screws holding the kickstand in place circled in red. There are also two small s..."
(Created page with "This page covers how to replace the kickstand on the following models: Ninebot ES1, Ninebot ES2, Ninebot ES3, Ninebot ES4, SNSC 1.0, SNSC 1.1. ==Removing the Old Kickstand== Carefully peel back the footmat making sure not to tear the rubber. thumb|center|400px|The 3 screws underneath the footmat. There are three hex/Allen M2.5/2.5mm machine screws holding the kickstand in place circled in red. There are also two small s...") |
(No difference)
|