Ninebot SNSC 2.0: Difference between revisions

← Older edit

Ninebot SNSC 2.0 (view source)

Revision as of 22:58, 23 February 2024

736 bytes added , 23 February

no edit summary

Joeybab3

Administrators, Swags, Bureaucrats, Administrators

2,822

edits

@@ Line 1: / Line 1: @@
-The SNSC 2.0 or Ninebot Max is the rental/sharing version of the [[Ninebot G30P|Ninebot Max/G30]].
+The '''SNSC 2.0''' or "'''Ninebot Max'''" is the rental/sharing version of the [[Ninebot G30P|Ninebot Max/G30]] mase by [[Segway-Ninebot]].
-It succeeds the [[Ninebot SNSC 1.0]] and is much more sturdy.
+It succeeds the [[Ninebot SNSC 1.0|SNSC 1.0/1.1]] and is much more sturdy.
 This model is succeeded by the [[Ninebot SNSC 2.2]].
 [[File:NinebotSNSC2.0.png|thumb|400px|center|The Ninebot Max/SNSC 2.0 via Segway[https://b2b.segway.com/max/].]]
+==Specifications==
+Original specs [https://store.segway.com/ninebot-kickscooter-max via Segway].
+{| class="wikitable"
+|+Ninebot SNSC 2.0
+|-
+|Dimensions
+|~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm)
+|-
+|Net Weight
+|Approx. 41.2 lbs (18.7 kg)
+|-
+|Rider Weight
+|66.1-220.5 lbs (30.0-100.0 kg)
+|-
+|Max Speed
+|Approx. 18.6 mph (30 km/h) (depends on regional configuration)
+|-
+|Advertised Range
+|Approx. 40.5 miles (60 km)
+|-
+|Max Slope
+|14%
+|-
+|Traversable Terrain
+|Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
+|-
+|Operating Temperature
+|14-104°F (-10-40°C)
+|-
+|Storage Temperature
+| -4-122°F (-20-50°C)
+|-
+|IP Rating
+|IPX5
+|-
+|Charge Time
+|Approx. 6h
+|-
+|Battery Voltage
+|36 VDC
+|-
+|Charging Voltage
+|42 VDC
+|-
+|Charging Temperature
+|32-104°F (0-40°C)
+|-
+|Battery Capacity
+|15300 mAh / 551 Wh
+|-
+|Motor Power
+|350W (Max 750W)
+|-
+|Internal Charger Power
+| 121W
+|-
+|Internal  Current
+|2.9A
+|-
+|Shocks
+|None
+|-
+|Tires
+|Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle
+|}
 ==Brochure==
 [[File:NinebotSNSC2.0Brochure.pdf]]
-==Specifications==
 ==Conversion==
@@ Line 25: / Line 91: @@
 ==Custom Firmware (CFW) Support==
-ScooterHacking.org currently has support for this model in their CFW Generator available at [https://max.cfw.sh max.cfw.sh].
+{{G30-like CFW Support}}
-Once Converted using the guides above, CFW can be generated and flashed using the guides below:
-*[[Flash Ninebot Max ESC]]
+==Serial Prefix/Region==
-*[[Flash Ninebot Max BMS]]
-*[[Flash Ninebot Max BLE]]
-CFW usually refers to custom firmware for the ESC, though there are some CFW versions for BLE and BMS.
+*Lyft SNSC 2.0: '''N4LYL'''
-ScooterHacking also supports this model with their [[SHFW]].
+*Spin SNSC 2.0: '''N4LPL'''
-[[Category: Scooters]]
+[[Category: Scooters]][[Category: Ninebot]]