Ninebot SNSC 1.1
The SNSC 1.1 is a budget rental scooter made by Ninebot.
It is the rental version, most similar to the Ninebot ESX series.
There are not any known differences between the SNSC 1.1 and SNSC 1.0, other than that the 1.1 often did not come with an external battery from the factory.
![[1]](https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg){kind=link}
Specs
| Dimensions | Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) |
| Net Weight | Approx. 30.9 lbs (14.0 kg) |
| Rider Weight | 55–220 lbs (25–100 kg) |
| Max Speed | Approx. 15 mph (25 km/h) |
| Advertised Range | Approx. 15.0 miles (25 km) |
| Max Slope | Approx. 15% |
| Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
| Operating Temperature | 14–104°F (-10–40°C) |
| Storage Temperature | -4–122°F (-20–50°C) |
| IP Rating | IP54 |
| Charge Time | Approx. 4h |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Temperature | 32–104°F (0–40°C) |
| Battery Capacity | 5100mAh / 172Wh |
| Motor Power | 300W |
| Charger Power | 71W |
| Charger Current | 1.7A |
Modding
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
Once converted, CFW can be generated and flashed using the guides below:
CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.
ScooterHacking's SHFW also supports this model.
ScooterHacking features more in-depth information on this model on their ESX Wiki Page.