Ninebot SNSC 1.1

From Joey's Wiki
Revision as of 19:15, 2 September 2023 by Joeybab3 (talk | contribs) (→‎Modding)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The SNSC 1.1 is a budget rental scooter made by Ninebot.

It is the rental version, most similar to the Ninebot ESX series.

There are not any known differences between the SNSC 1.1 and SNSC 1.0, other than that the 1.1 often did not come with an external battery from the factory.

The Ninebot SNSC 1.0 via Segway[1].

Specs

Ninebot SNSC 1.1
Dimensions Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Net Weight Approx. 30.9 lbs (14.0 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 15 mph (25 km/h)
Advertised Range Approx. 15.0 miles (25 km)
Max Slope Approx. 15%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature -4–122°F (-20–50°C)
IP Rating IP54
Charge Time Approx. 4h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 5100mAh / 172Wh
Motor Power 300W
Charger Power 71W
Charger Current 1.7A

Modding

This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking's SHFW also supports this model.

ScooterHacking features more in-depth information on this model on their ESX Wiki Page.

Serial Prefix/Region