Ninebot SNSC 1.1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 74: | Line 74: | ||
ScooterHacking's [[SHFW]] also supports this model. | ScooterHacking's [[SHFW]] also supports this model. | ||
==Serial Prefix/Region== | |||
[[Category: Scooters]][[Category: Ninebot]] | [[Category: Scooters]][[Category: Ninebot]] |
Revision as of 04:25, 16 May 2023
The SNSC 1.1 is a budget rental scooter made by Ninebot.
It is the rental version, most similar to the Ninebot ESX series.
There are not any known differences between the SNSC 1.1 and SNSC 1.0, other than that the 1.1 often did not come with an external battery from the factory.
Specs
Dimensions | Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) |
Net Weight | Approx. 30.9 lbs (14.0 kg) |
Rider Weight | 55–220 lbs (25–100 kg) |
Max Speed | Approx. 15 mph (25 km/h) |
Advertised Range | Approx. 15.0 miles (25 km) |
Max Slope | Approx. 15% |
Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
Operating Temperature | 14–104°F (-10–40°C) |
Storage Temperature | -4–122°F (-20–50°C) |
IP Rating | IP54 |
Charge Time | Approx. 4h |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32–104°F (0–40°C) |
Battery Capacity | 5100mAh / 172Wh |
Motor Power | 300W |
Charger Power | 71W |
Charger Current | 1.7A |
Modding
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
ScooterHacking's SHFW also supports this model.