Administrators, Swags, Bureaucrats, Administrators
2,822
edits
No edit summary |
No edit summary |
||
(19 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
The SNSC 1.0 is a budget scooter made by Ninebot. | The '''SNSC 1.0''' is a budget scooter made by Ninebot. | ||
It is the rental version, most similar to the Ninebot ESX series. | It is the rental version, most similar to the Ninebot ESX series. | ||
Line 6: | Line 6: | ||
For the 300W models, their equivalents were the [[Ninebot ES2]], and [[Ninebot ES4]]. | For the 300W models, their equivalents were the [[Ninebot ES2]], and [[Ninebot ES4]]. | ||
This model was succeeded by the [[Ninebot SNSC 2.0|SNSC 2.0]]. | |||
[[File:NinebotSNSC1.0.jpg|thumb|512px|center|The Ninebot SNSC 1.0 via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg].]] | [[File:NinebotSNSC1.0.jpg|thumb|512px|center|The Ninebot SNSC 1.0 via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg].]] | ||
These models did not fold but were otherwise compatible with most ESX hardware. | These models did not fold but were otherwise compatible with most ESX hardware. | ||
Some of these models included the RGB deck lights/underglow LEDs but many later units did not. | |||
==Specs== | |||
{| class="wikitable" | |||
|+Ninebot SNSC 1.0 | |||
|- | |||
|Dimensions | |||
|Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) | |||
|- | |||
|Net Weight | |||
|Approx. 30.9 lbs (14.0 kg) | |||
|- | |||
|Rider Weight | |||
|55–220 lbs (25–100 kg) | |||
|- | |||
|Max Speed | |||
|Approx. 18.6 mph (30 km/h) | |||
|- | |||
|Advertised Range | |||
|Approx. 28.0 miles (45 km) | |||
|- | |||
|Max Slope | |||
|Approx. 15% | |||
|- | |||
|Traversable Terrain | |||
|Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) | |||
|- | |||
|Operating Temperature | |||
|14–104°F (-10–40°C) | |||
|- | |||
|Storage Temperature | |||
| -4–122°F (-20–50°C) | |||
|- | |||
|IP Rating | |||
|IP54 | |||
|- | |||
|Charge Time | |||
|Approx. 7h | |||
|- | |||
|Battery Voltage | |||
|36 VDC | |||
|- | |||
|Charging Voltage | |||
|42 VDC | |||
|- | |||
|Charging Temperature | |||
|32–104°F (0–40°C) | |||
|- | |||
|Battery Capacity | |||
|10400 mAh 374 Wh <br/> (via 2 batteries at 5100mAh/172Wh) | |||
|- | |||
|Motor Power | |||
|300W | |||
|- | |||
|Charger Power | |||
|71W | |||
|- | |||
|Charger Current | |||
|1.7A | |||
|} | |||
==Notes on Bird ES4-800== | |||
This model was used exclusively for rental use. | |||
Bird did sell off their overstock of '''SNSC 1.0''' vehicles at stores such as Walmart, Best Buy, Sam's Club, etc... | |||
Because of this, there are some listings for it under the model names: | |||
*Bird ES1-300 | |||
*Bird ES1-300RN (Renewed) | |||
*Bird ES4-800 | |||
*Bird ES4-800RN (Renewed) | |||
The only difference is that the ES1-300 did not include an external battery. | |||
Other than that these models are part-for-part compatible with other SNSC 1.0 and ESX series scooters from Segway. | |||
[[File: BirdES4-800.jpg|thumb|center|256px|The "Bird ES4-800", which was similar to the ES3.]] | |||
==Modding== | ==Modding== | ||
{{ESX-like CFW Support}} | |||
==Serial Prefix/Region== | |||
*'''N2GR''' - Bird ES4/SNSC 1.0 - Now used for [[Ninebot E45D]] | |||
*'''N2LY''' - Lyft SNSC 1.0 | |||
[[Category: Scooters]][[Category: Ninebot]] | [[Category: Scooters]][[Category: Ninebot]] |