The SNBLK 1.0 was the Lime-specific version of the SNSC 1.0.

It featured underglow on most units

The Ninebot SNSC 1.0BLK via Segway[1].

These models did not fold but were otherwise compatible with most ESX hardware.

This model was one of the first available SNSC 1.0 units.

Specs

Ninebot SNSC 1.0BLK
Dimensions Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Net Weight Approx. 30.9 lbs (14.0 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 18.6 mph (30 km/h)
Advertised Range Approx. 28.0 miles (45 km)
Max Slope Approx. 15%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature -4–122°F (-20–50°C)
IP Rating IP54
Charge Time Approx. 7h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10400 mAh 374 Wh
Motor Power 800W
Charger Power 71W
Charger Current 1.7A

Modding

This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking's SHFW also supports this model.

ScooterHacking features more in-depth information on this model on their ESX Wiki Page.

Serial Prefix/Region