Ninebot SNBLK 1.0: Difference between revisions
Jump to navigation
Jump to search
m (Joeybab3 moved page Ninebot 1.0BLK to Ninebot SNBLK 1.0) |
No edit summary |
||
| Line 1: | Line 1: | ||
The | The SNBLK 1.0 was the Lime-specific version of the [[Ninebot SNSC 1.0|SNSC 1.0]]. | ||
It featured underglow on most units | It featured underglow on most units | ||
Revision as of 17:00, 21 February 2023
The SNBLK 1.0 was the Lime-specific version of the SNSC 1.0.
It featured underglow on most units
![[1]](https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg){kind=link}
These models did not fold but were otherwise compatible with most ESX hardware.
This model was one of the first available SNSC 1.0 units.
Specs
| Dimensions | Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) |
| Net Weight | Approx. 30.9 lbs (14.0 kg) |
| Rider Weight | 55–220 lbs (25–100 kg) |
| Max Speed | Approx. 18.6 mph (30 km/h) |
| Advertised Range | Approx. 28.0 miles (45 km) |
| Max Slope | Approx. 15% |
| Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
| Operating Temperature | 14–104°F (-10–40°C) |
| Storage Temperature | -4–122°F (-20–50°C) |
| IP Rating | IP54 |
| Charge Time | Approx. 7h |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Temperature | 32–104°F (0–40°C) |
| Battery Capacity | 10400 mAh 374 Wh |
| Motor Power | 800W |
| Charger Power | 71W |
| Charger Current | 1.7A |
Modding
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
ScooterHacking's SHFW also supports this model.