Ninebot SNBLK 1.0: Difference between revisions
Jump to navigation
Jump to search
m (Joeybab3 moved page Ninebot 1.0BLK to Ninebot SNBLK 1.0) |
No edit summary |
||
Line 1: | Line 1: | ||
The | The SNBLK 1.0 was the Lime-specific version of the [[Ninebot SNSC 1.0|SNSC 1.0]]. | ||
It featured underglow on most units | It featured underglow on most units |
Revision as of 17:00, 21 February 2023
The SNBLK 1.0 was the Lime-specific version of the SNSC 1.0.
It featured underglow on most units
These models did not fold but were otherwise compatible with most ESX hardware.
This model was one of the first available SNSC 1.0 units.
Specs
Dimensions | Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) |
Net Weight | Approx. 30.9 lbs (14.0 kg) |
Rider Weight | 55–220 lbs (25–100 kg) |
Max Speed | Approx. 18.6 mph (30 km/h) |
Advertised Range | Approx. 28.0 miles (45 km) |
Max Slope | Approx. 15% |
Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
Operating Temperature | 14–104°F (-10–40°C) |
Storage Temperature | -4–122°F (-20–50°C) |
IP Rating | IP54 |
Charge Time | Approx. 7h |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32–104°F (0–40°C) |
Battery Capacity | 10400 mAh 374 Wh |
Motor Power | 800W |
Charger Power | 71W |
Charger Current | 1.7A |
Modding
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
ScooterHacking's SHFW also supports this model.