Ninebot Max Error Code 50: Difference between revisions
Jump to navigation
Jump to search
(Created page with "thumb|center|200px|Error 50 on a Ninebot Max. "Built-in battery temperature sensor error, please replace battery" {{Ninebot Max Error Code SEO|50}} ==Cause== The error is likely caused when the temperature sensor is not reporting a proper value. As of yet, I have not personally experienced this error so I cannot speak to its causes or solutions. ==Fix== Restart the scooter. Category: ScootersCategory: NinebotCategory: Max") |
No edit summary |
||
| Line 2: | Line 2: | ||
"Built-in battery temperature sensor error, please replace battery" | "Built-in battery temperature sensor error, please replace battery" | ||
Alternatively: | |||
"Battery-ESC Handshake Failed" | |||
{{Ninebot Max Error Code SEO|50}} | {{Ninebot Max Error Code SEO|50}} | ||
| Line 7: | Line 11: | ||
==Cause== | ==Cause== | ||
The error is likely caused when the temperature sensor is not reporting a proper value. | There are two causes for this error depending on the type. | ||
The temperature error is likely caused when the temperature sensor is not reporting a proper value. | |||
The second is caused when rental firmware is being used and hasn't been set up properly. | |||
==Fix== | ==Fix== | ||
Restart the scooter. | Restart the scooter to see if it is temporary. | ||
For the ESC-Battery Handshake, you will need to upgrade your IoT device to the latest firmware and possibly consult segway to get the BMS link command. | |||
[[Category: Scooters]][[Category: Ninebot]][[Category: Max]] | [[Category: Scooters]][[Category: Ninebot]][[Category: Max]] | ||
Revision as of 00:05, 4 July 2022
"Built-in battery temperature sensor error, please replace battery"
Alternatively:
"Battery-ESC Handshake Failed"
If your Ninebot Max is beeping or has a red wrench icon and flashes this code, read below.
If you clicked the wrong error code, go back to the Error Code Index.
Previous Error Code: Ninebot Max Error Code 49 - Next Error Code: Ninebot Max Error Code 51
Cause
There are two causes for this error depending on the type.
The temperature error is likely caused when the temperature sensor is not reporting a proper value.
The second is caused when rental firmware is being used and hasn't been set up properly.
Fix
Restart the scooter to see if it is temporary.
For the ESC-Battery Handshake, you will need to upgrade your IoT device to the latest firmware and possibly consult segway to get the BMS link command.