Segway Power Station Cube Firmware

Firmware is essentially the Operating System for the power station's different parts.

Each part runs a different firmware. If you need to find a changelog relating to the original firmware for the Segway Cube Power Station 1000/2000, this is the place.

Below is a list of all firmware versions(BMS, BLE, etc) for this model:

Inverter 1/INV1 Firmware

• Segway Power Station Cube INV1 V3.3.6
• Segway Power Station Cube INV1 V3.3.10/V3.3.A
• Segway Power Station Cube INV1 V3.4.1
• Segway Power Station Cube INV1 V3.4.3

Inverter 2/INV2 Firmware

• Segway Power Station Cube INV2 V3.3.4
• Segway Power Station Cube INV2 V3.3.7
• Segway Power Station Cube INV2 V3.3.11/V3.3.B

DC Controller/PV Firmware

• Segway Power Station Cube PV V1.0.7
• Segway Power Station Cube PV V1.0.9
• Segway Power Station Cube PV V1.0.10/V1.0.A

BMS/Battery Firmware

• Segway Power Station Cube BMS V1.2.2
• Segway Power Station Cube BMS V1.2.3
• Segway Power Station Cube BMS V1.2.9
• Segway Power Station Cube BMS V1.2.11/V1.2.B

Master Control/MCU Firmware

• Segway Power Station Cube MCU V1.1.1
• Segway Power Station Cube MCU V1.1.4
• Segway Power Station Cube MCU V1.1.7
• Segway Power Station Cube MCU V1.1.8

BLE Firmware

• Segway Power Station Cube BLE V1.0.9
• Segway Power Station Cube BLE V1.0.12/V1.0.C