Ninebot Max Error Code 50

From Joey's Wiki
Revision as of 16:19, 5 July 2022 by Joeybab3 (talk | contribs)
Jump to navigation Jump to search
File:NinebotMaxError50.png
Error 50 on a Ninebot Max.
"Built-in battery temperature sensor error, please replace battery"

Alternatively: 

"Verification between battery and controller failed"

Read below if your Ninebot Max G30 or G2 is beeping or has a red wrench icon and flashes this code.

If you clicked the wrong error code, return to the Max G30 and G2 Error Code Index.

Previous Error Code: Ninebot Max Error Code 49 - Next Error Code: Ninebot Max Error Code 51

Cause

There are two causes for this error depending on the type.

The temperature error is likely caused when the temperature sensor is not reporting a proper value.

The second is caused when rental firmware is being used and hasn't been set up properly.

Fix

Restart the scooter to see if it is temporary.

For the ESC-Battery Handshake, you will need to upgrade your IoT device to the latest firmware and possibly consult segway to get the BMS link command.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Ninebot_Max_Error_Code_50&oldid=611"