Ninebot E2 Pro
The Ninebot E2 Pro is the upgraded version of the Ninebot E2 Plus by Ninebot.
It is a part of the Ninebot E Series.
Specs
Original specs via Segway.
| Dimensions | Unfolded: Approx. 45.9 × 21.2 × 48 in (1168 × 540 × 1220 mm) Folded: Approx. 45.9 × 21.1 × 22.2 in (1168 × 538 × 565 mm) |
| Net Weight | Approx. 41.4 lbs (18.8 kg) |
| Rider Weight | Max. 265 lbs (120 kg) |
| Recommended Age | 16+ |
| Required Height | 4'5–6'5 (140–200 cm) |
| Max Speed | Approx. 15.5 mph (25 km/h) |
| Advertised Range | Approx. 21.7 miles (35 km) (Tested at 12.4 mph / 20 km/h) (Max range: Approx. 24.9 miles / 40 km at 9.3 mph / 15 km/h) |
| Max Slope | Approx. 18% |
| IP Rating | IPX4 |
| Tires | 10-inch air-leakage-proof tubeless pneumatic tires Recommended Pressure: 45±3 psi |
| Traversable Terrain | Mostly smooth roads or normal asphalt, tarmac roads |
| Operating Temperature | 14–104°F (-10–40°C) |
| Storage Temperature | |
| Battery Voltage | 36 V |
| Charging Voltage | 42 V |
| Charging Temperature | 32–104°F (0–40°C) |
| Battery Capacity | 7650 mAh / 275 Wh |
| Battery Management System | Protection against overvoltage/undervoltage/short circuit/overcurrent/overtemperature |
| Motor Power | 350 W |
| Max Power | 750 W |
| Charger Power | 70 W |
| Charger Current | 1.7 A |
| Duration of Charging | Approx. 5.5 h |
| Shocks | Front Spring Suspension |
Manuals
This version uses the same manual as the Ninebot E2.
Modding
As of right now, it is not known whether ScooterHacking supports this model.
ScooterHacking features more in-depth information on this model on their E-Series Wiki Page.