Wyse 5060 RAM Upgrade
This page shows how to upgrade the ram on the Dell Wyse 5060/N07D.
Dissassembly
To start, 3 screws hold the front cover in place. Use a small Phillips head screwdriver to remove them.
![](/wiki/images/thumb/c/c1/DellWyse5060FrontPanelScrews.jpg/400px-DellWyse5060FrontPanelScrews.jpg)
Next slide the front cover off.
![](/wiki/images/thumb/1/12/DellWyse5060FrontPanelRemoval.jpg/400px-DellWyse5060FrontPanelRemoval.jpg)
Underneath the front panel are 5 screws holding on a structural/protective cover. Remove these and slide the cover in the direction of the arrow etched on the board.