Ninebot Max G30 Replace Headlight: Difference between revisions
(Created page with "Lyft scooters come with a headlight more similar to that of the ESX headlight. By default, it is stuck on whenever the scooter is on. ==Removing the Handlebar== {{Replace Ninebot Max Headlight}} Category: ScootersCategory: NinebotCategory: RepairCategory: Max") |
m (Joeybab3 moved page Ninebot Max Replace Headlight to Ninebot Max G30 Replace Headlight) |
(No difference)
|
Latest revision as of 05:33, 12 June 2024
Lyft scooters come with a headlight more similar to that of the ESX headlight.
By default, it is stuck on whenever the scooter is on.
Removing the Handlebar
Once you have bought a new light, start by removing the 6 screws from the handlebar pole.
They should be Security Torx T20, but in some cases, the more difficult-to-remove custom screws will be present.
Inside the handlebar, 2 Allen screws hold a gray plastic clip in place.
Remove the plastic clip so that you can pop out the headlight.
Unplug the headlight and pop it out.
The connector is a two-wire connector that has gray and white connected to yellow and white because it is not intended for the max.
The new headlight should have a matching yellow and white connector. Plug it in and replace the gray headlight clip.