Ninebot Max Replace Headlight

Lyft scooters come with a headlight more similar to that of the ESX headlight.

By default, it is stuck on whenever the scooter is on.

Removing the Handlebar

Once you have bought a new light, start by removing the 6 screws from the handlebar pole.

They should be Security Torx T20, but in some cases, the more difficult-to-remove custom screws will be present.

6 Torx/Allen/hex screws hold the handlebar in place in the pole.

Inside the handlebar, 2 Allen screws hold a gray plastic clip in place.

Two Allen screws hold the plastic securing clip in place.

Remove the plastic clip so that you can pop out the headlight.

Unplug the headlight and pop it out.

The connector is a two-wire connector that has gray and white connected to yellow and white because it is not intended for the max.

The headlight connector.

The new headlight should have a matching yellow and white connector. Plug it in and replace the gray headlight clip.

The headlight connector.