Ninebot NEE1006-M: Difference between revisions
Jump to navigation
Jump to search
(→Specs) |
(→Specs) |
||
| Line 7: | Line 7: | ||
==Specs== | ==Specs== | ||
Original specs [https://store.segway.com/battery-assembly-2-max-g30p via Segway]. | Original specs [https://store.segway.com/battery-assembly-2-max-g30p via Segway][https://store.segway.com/battery-assembly-max2]. | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 20:45, 19 October 2024
The Ninebot NEE1006-M is a non-removeable battery intended for the Ninebot Max series scooters.
It is the non-removable version of the Ninebot NEE1006-M1.
Specs
Original specs via Segway[2].
| Dimensions | 423mm×130mm×78mm |
| Weight | 6kg |
| Rated Capacity | 15.3Ah |
| Rated Power | 551Wh |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Temperature | 32–104°F (0–40°C) |
| Range* | 60km |
| Cells Used | EVE / FAR EAST |
| Cell Size | 18650 |
| Waterproof Rating | IPX7 |
| SKU | AB.00.0021.88 & AB.05.15.00.0029 (Gen 2) |
Range*: Max plus, 25 degrees c, windless, 75kg weight, 16km/h measured at a consistent speed.
BMS Firmware
Older versions of this BMS are based on the STM8 series of MCU while newer ones are based on the STM32 series.
Gen 1
This battery is based on the STM8L151K6 family of MCU and is compatible with standard G30 BMS Firmware.
Most use the pcb-nee1006-m-v0.5 layout, with some using the older N1006_DESAY_25R009.
You can find more info about this firmware by viewing the Ninebot Max/G30 STM8 BMS Firmware Index.
- Ninebot Max BMS 1.3.4
- Ninebot Max BMS 1.5.3
- Ninebot Max BMS 1.5.5
- Ninebot Max BMS 1.5.6
- Ninebot Max BMS 1.5.8
Gen 2
This battery is based on the STM32-based MCU.
Serial Prefixes/Regions
- 1AHGK - Gen 2 Ninebot NEE1006-M