Ninebot NEE1006-M: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 52: | Line 52: | ||
==BMS Firmware== | ==BMS Firmware== | ||
Older versions of this BMS are based on the STM8 series of MCU while newer ones are based on the STM32 series. | |||
==Gen 1== | |||
This battery is based on the '''STM8L151K6''' family of MCU and is compatible with standard G30 BMS Firmware. | This battery is based on the '''STM8L151K6''' family of MCU and is compatible with standard G30 BMS Firmware. | ||
| Line 64: | Line 68: | ||
*[[Ninebot Max BMS 1.5.6]] | *[[Ninebot Max BMS 1.5.6]] | ||
*[[Ninebot Max BMS 1.5.8]] | *[[Ninebot Max BMS 1.5.8]] | ||
==Gen 2== | |||
[[Category: Scooters]][[Category: Ninebot]][[Category: Battery]] | [[Category: Scooters]][[Category: Ninebot]][[Category: Battery]] | ||
Revision as of 18:22, 19 October 2024
The Ninebot NEE1006-M is a non-removeable battery intended for the Ninebot Max series scooters.
It is the non-removable version of the Ninebot NEE1006-M1.
Specs
Original specs via Segway.
| Dimensions | 423mm×130mm×78mm |
| Weight | 6kg |
| Rated Capacity | 15.3Ah |
| Rated Power | 551Wh |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Temperature | 32–104°F (0–40°C) |
| Range* | 60km |
| Cells Used | EVE / FAR EAST |
| Cell Size | 18650 |
| Waterproof Rating | IPX7 |
| SKU | AB.00.0021.88 |
Range*: Max plus, 25 degrees c, windless, 75kg weight, 16km/h measured at a consistent speed.
BMS Firmware
Older versions of this BMS are based on the STM8 series of MCU while newer ones are based on the STM32 series.
Gen 1
This battery is based on the STM8L151K6 family of MCU and is compatible with standard G30 BMS Firmware.
Most use the pcb-nee1006-m-v0.5 layout, with some using the older N1006_DESAY_25R009.
You can find more info about this firmware by viewing the Ninebot Max/G30 STM8 BMS Firmware Index.
- Ninebot Max BMS 1.3.4
- Ninebot Max BMS 1.5.3
- Ninebot Max BMS 1.5.5
- Ninebot Max BMS 1.5.6
- Ninebot Max BMS 1.5.8