STLink Ninebot Max G30 Gen 2 ESC: Difference between revisions

← Older edit

STLink Ninebot Max G30 Gen 2 ESC (view source)

Revision as of 05:42, 26 June 2024

3 bytes added , 26 June

no edit summary

Joeybab3

Administrators, Swags, Bureaucrats, Administrators

2,932

edits

@@ Line 37: / Line 37: @@
 Carefully unplug each of the connectors.
-You may need to scrape more rubber potting compounds away from some of the connectors in order to unplug them.
+You may need to scrape more rubber potting compounds away from some of the connectors to unplug them.
 ===Accessing The Pins===
@@ Line 79: / Line 79: @@
 ===Testing===
-Remove the STLink and plug back in the ESC and use [[ScooterHacking Utility]] to check that your version number is now [[Ninebot Max DRV 1.6.13|1.6.13]] or [[Ninebot Max DRV 1.7.3|1.7.3]].
+Remove the STLink and plug the ESC back in, then use [[ScooterHacking Utility]] to check that your version number is now [[Ninebot Max DRV 1.6.13|1.6.13]] or [[Ninebot Max DRV 1.7.3|1.7.3]].
 [[File:NinebotMaxGen2ControllerSuccessfulDowngrade.png|thumb|center|400px|The downgrade was successful as shown here by the version number.]]
-From here your motor may not work. Check [[Ninebot Max Motor Generations]] and see if you have a Gen 3 motor. If so you will want to flash firmware based on [[Ninebot Max DRV 1.8.7|1.8.7]] or above (either [[SHFW]] or one of the patched [[Ninebot Max DRV 1.8.7|1.8.7]] or [[Ninebot Max DRV 1.8.8|1.8.8]] versions).
+'''From here your motor may not work'''.
+Check [[Ninebot Max Motor Generations]] and see if you have a Gen 3 motor.
+If so you will want to flash firmware based on [[Ninebot Max DRV 1.8.7|1.8.7]] or above (either [[SHFW]] or one of the patched [[Ninebot Max DRV 1.8.7|1.8.7]] or [[Ninebot Max DRV 1.8.8|1.8.8]] versions).
 [[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: STLink]]