Ninebot ESX Error Code A0: Difference between revisions

Ninebot ESX Error Code A0 (view source)

89 bytes removed , 10 December 2024

no edit summary

3,850

edits

@@ Line 1: / Line 1: @@
-Error "'''A0'''" is not actually an error.
+For the [[Ninebot G30|Max G30]]/[[Ninebot SNSC 2.0|SNSC 2.0]]+, see [[Ninebot Max Error Code A0]].
-This page documents '''Error A0''' for the Ninebot ES1, ES2, ES3, and ES4, as well as the rental models SNSC 1.0, and SNSC 1.1.
+{{Ninebot ESX Error Code SEO|10}}
-For the Max G30/SNSC 2.0+, see [[Ninebot Max Error Code A0]].
+Error "'''A0'''" is not an error.
-{{Ninebot ESX Error Code SEO|10}}
 ==Cause==
-If your scooter displays "A0" and isn't charging anymore it's because your scooter is fully charged.
+If your scooter displays "'''A0'''" and isn't charging anymore it's because your scooter is fully charged.
-The "A" is the equivalent of "10" in hexadecimal, so you have 10 0 or 100% charged.
+The "'''A'''" is the equivalent of "10" in hexadecimal, so you have 10 0 or 100% charged.
 You likely installed firmware on your scooter with "show battery percentage while idle" enabled.